ZTE MF289F (Vodafone FWA) - Sblocchi e dintorni..

Ho un grosso problema ... non ho la sezione dove impostare l'apn ... sono cieco io o cosa?

Ho risolto

Sevrus Hai provato a resettare il router e soprattutto mettere una SIM valida?
O ti manca questa parte ...

Whity67
Ho dovuto cambiare la modalità corrente in lte bridge per far comparire la homepage per intero così da modificare apn e poi tornare a quella wireless per navigare. Tutto risolto grazie

Ora noto che ogni tot ore, per un mezzo secondo, cade il segnale 4g.
Col modem di prima non accadeva per cui non sono sim e pc.

hitech95 I'm tring to connect a serial to a ZTE T3000 router ( no modem ) , and under CPU EMI shield there is identical 2 pins , i tried to connect there with CH340 USB-TTL converter ( shoul support 1,8V) , but unfortunatly not receiving any log , but LED on this device blinks exacly ,like there where a serial comunication.

So can you give information wha kind of converter you used ,what was the communication parameters ( 115 200 baud 8N1 or other ?) and perhops other tricks ( like pullup or pull down to 1,8V or to ground via resistor ?

By the way your log from pasebin not working anymore....

You could PM to me , as it is offtopic....

Marcin
Hi, only seen now the message, sorry.

The converter I've used is a CH340. params: 115200 8N1.
But I've might also have tried with an original FTDI or a CP2102.
I'm gonna try again next week, I'm out of the city.

I'm going to see if I can find the log somewhere in my server.

EDIT:
OEM Bootlog

My yellow cable is the MODEM RX, the pink one is MODEM TX.
The gray is the GND I've soldered it to the shield/can.

Hey

https://cacombos.com/device/MF289F

https://miononno.it/files/zte-v3.0b.min.txt

A(T2) ??

B1+3+7 ok why no 4x ca B1+3+7+38 or +B8

Thanks