lucianom @r0ger_net ho testato anche io l'uplink CA sotto Postemobile (quindi Vodafone) e anche a me non cambia nulla, anzi tenendo aperta la pagina del router si vede proprio che in fase di upload torna in banda singola (in quanto la rete vodafone non rimane sempre in ca ma lo attiva solo quando serve).
Quindi sospetto che a livello italiano l'uplink CA non venga utilizzato... qualcuno più esperto in materia può confermare?

Since in Italy there is possibility to use B32 Band ( in TIM or Vodafone ) can you guys check , if MF286D is able to use it , by setting in set band value : 0x80000000 ?
Looks like officially in gui there is not possilbe , but modem it self accepting this value ( anfortunatly we don't have network to confirm).
There is also B2 - 0x2 and B5 - 0x10 , but they are not availble in your country as well....

EDIT: Maybe this band is only for supporting download and not working alone ?
Maybe it is needed to try with B1 , so value 0x80000001... or with B3 so 0x80000004 ... or with B7 0x80000040...

    Marcin B32 is only for downlink so like you said it isn't used alone, only in CA.
    I don't have B32 where i live so i can't try, maybe someone else in the forum could help!

    Will be good , that somone is able to confirm , that CA with this band is working....( since i.e. in UK it is said , that MF286D supports B32...)
    Even bettar , that this will be confirmed in console via command :
    echo -e -n 'AT+ZCAINFO?\r' > /dev/ttyUSB1 && grep -m1 "ZCAINFO:" /dev/ttyUSB1

    • Marcin ha risposto a questo messaggio

      Here is full instruction how to check band controling on original firmware

      We need your support to check b2,b5 and b32 controlling by AT commands on original firmware. We cannot test those bands in Poland and we do not have those bands even in our original gui.

      Please avoid USB/uart adapter made on CH340 because one generates "bushes" on startup.
      Properly working adapted is made on CP2102 oe PL2303.
      Please connect PC with eg. teratem app via USB/uart cable and try to control modem module by means of AT commands as below:

      Examples of AT command sending:
      echo -e -n 'AT+ZNLOCKBAND=1,0,80005,0\r' > /dev/ttyUSB1
      echo -e -n 'AT+ZCAINFO?\r' > /dev/ttyUSB1 && grep -m1 "ZCAINFO:" /dev/ttyUSB1
      echo -e -n 'AT+ZNLOCKBAND?\r' > /dev/ttyUSB1 && grep -m1 "ZNLOCKBAND:" /dev/ttyUSB1

      Band locking examples:
      AT+ZNLOCKBAND=1,0,1,0 - Band 1
      AT+ZNLOCKBAND=1,0,4,0 - Band 3
      AT+ZNLOCKBAND=1,0,40,0 - Band 7
      AT+ZNLOCKBAND=1,0,80000,0 - Band 20
      AT+ZNLOCKBAND=1,0,41,0 - Band B1 +B7
      AT+ZNLOCKBAND=1,0,45,0 - Band B1 + B3 + B7
      AT+ZNLOCKBAND=1,0,80040,0 Band 7 + 20
      AT+ZNLOCKBAND=1,0,80005,0 Band 20 + 1 +3
      AT+ZNLOCKBAND=1,0,2,0 - Band 2
      AT+ZNLOCKBAND=1,0,10,0 - Band 5
      AT+ZNLOCKBAND=1,0,80000000,0 - Band 32
      AT+ZNLOCKBAND=1,0,20080800C5,0 - All bands, this value is valid for polish bands, for italian bands can be different
      you can calculate proper value for eg. b1+b3+b32 by simple sum.
      Probably "real" all bands will have:
      AT+ZNLOCKBAND=1,0,20880800D7,0

      Other commands for your information
      AT commands for APN setting:
      AT+CGDCONT=1,"IP","internet","",0,0
      AT+CGACT=1,1

      aggregation information:
      AT+ZCAINFO? returns state

      primary cell information:
      AT+ZCELLINFO? returns state
      +ZCELLINFO: 70938895, 307, LTE B20, 6350

      Permanent pci/earfcn locking, to remove locking see below:
      AT+ZLOCKCELL=? command syntax help
      AT+ZLOCKCELL:earfcn_tag,pci_tag
      AT+ZLOCKCELL? returns state
      AT+ZLOCKCELL=6350,307 here sets locking to earfcn=6350 and pci=307
      and then AT+CFUN=1,1

      Permanent pci/earfcn locking removal:
      AT+ZLOCKCELL=0
      and then modem restart by AT+CFUN=1,1 or router power reboot

      locked bands information:
      AT+ZNLOCKBAND? returns state
      +ZNLOCKBAND: 80005,2000000680380

      uplink aggregation information:
      AT+ZULCA? returns state
      AT+ZULCA=1 enables uplink aggregation
      AT+ZULCA=0 disables upling aggregation

      Modem rebooting:
      AT+CFUN=1,1

      Modem state:
      AT+CFUN?

      • AngeM ha risposto a questo messaggio

        Buongiorno, ieri mio figlio mi ha dato un modem ZTE MF258A con unità esterna, il contratto FWA è già scaduto, non ci sono più vincoli, ho provato ad inserire apn Tim ibox, lo prende parte si accende la spia connesso ma dopo 10 secondi si spegne e il segnale del modem è dell'unità esterna lampeggia al massimo del segnale. Come posso risolvere? Mio figlio abita in altra località, pensate possa essere questo il problema? Grazie per le risposte.

          sajack66 bisogna chiedere al 187 di sbloccarlo.

            X le sim very e w3 vi segnalo che in una recente rimodulazione, il gestore arancione potrebbe bloccare l'uso delle sim nei router 4g.

            niceguy12 grazie mille per la dritta, ho già chiamato e hanno subito aperto una segnalazione che nel giro di un'oretta è già sbloccato e comunque l'operatore mi ha detto che potrei ricevere anche un messaggio o una chiamata per la conferma di sblocco

              sajack66 Posso chiederti se hanno richiesto qualche informazione personale o semplicemente i dati del modem/router da sbloccare?

                sajack66 e lhano gia sbloccato? sembra strano....a me e passato piu di 1 anno ed e ancora bloccato....

                  MentalBreach si mi hanno chiesto il codice fiscale di mio figlio e il nr. telefonico di rete fissa abbinato alla sim. Nonostante io abbia più volte tergiversato dicendo che gli davo il nr imei, il seriale o iccid, ha voluto soltanto cf e nr

                    niceguy12 adesso sono via, proverò per fine settimana e vi farò sapere

                    sajack66 Ok, quindi gli ZTE MF286D venduti su Subito come "bloccati" da un certo venditore campano non possono essere sbloccati; visto che non si sa chi fosse il proprietario originario (e quindi immagino che TIM ti risponda picche).

                    Ho fatto bene a richiedere il reso.

                    Grazie per la risposta 😊

                      MentalBreach non posso rispondere perché non sono informato, ma credo di poter affermare che in informatica nullo è precluso, bisogna solo armarsi di pazienza e di software idonei per poter ottenere quello che si desidera

                        pawol amazing! Which feature are currently not working? We can still use FXS port for voice? Thx in advance

                        Only voice is not supported

                        sajack66 Come ogni cosa, dipende.

                        Pazienza, "software idonei", conoscenze e tempo hanno tutte un costo.

                        Modificare un firmware, cambiare l'IMEI oppure giocare a "nascondino" con i gestori della rete mobile non vale la pena, solo per risparmiare 20/30 euro rispetto ad uno ZTE MF286D senza alcun blocco.

                        La mia era perlopiù una curiosità (piccolo aggiornamento: ho anche letto negli annunci su Subito che non si accettano più resi per i modem bloccati venduti da quella persona specifica).

                        Ragazzi sul router ZTE MF286D c'è un modo per installare direttamente il firmware Elisa versione B06 invece che installare prima la B03 e poi dover fare l'aggiornamento OTA ?

                        Informativa privacy - Informativa cookie - Termini e condizioni - Regolamento - Disclaimer - 🏳️‍🌈
                        P.I. IT16712091004 - info@fibraclick.it

                        ♻️ Il server di questo sito è alimentato al 100% con energia rinnovabile