Calo improvviso portante FTTC

fra20

Buongiorno, stamattina, dopo più di due mesi di velocità stabile e portante intorno ai 103/104 mega (vdsl 35b), mi ritrovo la velocità massima calata a 92. Cosa può essere successo? Qualche nuova attivazione? Di seguito le statistiche e i grafici (prima e dopo).
Prima:

Premi per mostrare Premi per nascondere

Parametri:

Hlog:

Qln:

Ora:

Premi per mostrare Premi per nascondere

Parametri:

Hlog:

Qln:

Bit DSL:

Parametri ed errori

antonioerpanettone

fra20 Qualche nuova attivazione?

Credo proprio di si, linea con molto rumore.

Filippo94

fra20 da quelle statistiche non si evince un aumento di rumore, né variazione di snrm o attenuazione. Hai provato a fare un rischio del modem e vedere se qualcosa cambia?

fra20

Pensavo anche io, poi ho dato un'occhiata ai log del router, tutto sembra essere successo ieri sera alle 22:20 (quindi non penso che sia una nuova attivazione, a meno che qualcuno in zona non sia tornato a casa dopo 2 mesi 😅 e abbia riacceso il router), fra l'altro c'è un aumento iniziale, per poi crollare nel giro di un minuto - da 105 a 91

Premi per mostrare Premi per nascondere

Fri Oct 6 22:21:55 2023 kern.crit kernel: [1074408.450581] Line 0: Rate Change, us=21600, ds=105166
Fri Oct 6 22:21:55 2023 kern.warn kernel: [1074408.450602] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:21:55 2023 kern.warn kernel: [1074408.450621] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:21:55 2023 kern.warn kernel: [1074408.450628] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:21:55 2023 kern.warn kernel: [1074408.450637] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:21:55 2023 kern.warn kernel: [1074408.450644] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:21:55 2023 kern.warn kernel: [1074408.450652] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:21:55 2023 kern.warn kernel: [1074408.450664] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:21:56 2023 daemon.err nanocdn-rr[10366]: ERROR mdnsT: msg truncated on socket #4
Fri Oct 6 22:21:56 2023 kern.crit kernel: [1074409.735477] Line 0: Rate Change, us=21600, ds=104646
Fri Oct 6 22:21:56 2023 kern.warn kernel: [1074409.735497] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:21:56 2023 kern.warn kernel: [1074409.735516] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:21:56 2023 kern.warn kernel: [1074409.735523] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:21:58 2023 kern.crit kernel: [1074411.020536] Line 0: Rate Change, us=21600, ds=104126
Fri Oct 6 22:21:58 2023 kern.warn kernel: [1074411.020557] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:21:58 2023 kern.warn kernel: [1074411.020576] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:21:58 2023 kern.warn kernel: [1074411.020583] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:21:59 2023 kern.crit kernel: [1074412.305539] Line 0: Rate Change, us=21600, ds=103606
Fri Oct 6 22:21:59 2023 kern.warn kernel: [1074412.305559] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:21:59 2023 kern.warn kernel: [1074412.305578] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:21:59 2023 kern.warn kernel: [1074412.305585] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:21:59 2023 kern.warn kernel: [1074412.475262] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:21:59 2023 kern.warn kernel: [1074412.475288] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:21:59 2023 kern.warn kernel: [1074412.475296] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:21:59 2023 kern.warn kernel: [1074412.475305] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:21:59 2023 kern.warn kernel: [1074412.475313] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:21:59 2023 kern.warn kernel: [1074412.475320] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:21:59 2023 kern.warn kernel: [1074412.475331] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:00 2023 kern.crit kernel: [1074413.590461] Line 0: Rate Change, us=21600, ds=103116
Fri Oct 6 22:22:00 2023 kern.warn kernel: [1074413.590480] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:00 2023 kern.warn kernel: [1074413.590499] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:00 2023 kern.warn kernel: [1074413.590506] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:02 2023 kern.crit kernel: [1074414.875484] Line 0: Rate Change, us=21600, ds=102657
Fri Oct 6 22:22:02 2023 kern.warn kernel: [1074414.875505] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:02 2023 kern.warn kernel: [1074414.875524] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:02 2023 kern.warn kernel: [1074414.875531] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:03 2023 kern.crit kernel: [1074416.160461] Line 0: Rate Change, us=21600, ds=102168
Fri Oct 6 22:22:03 2023 kern.warn kernel: [1074416.160481] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:03 2023 kern.warn kernel: [1074416.160500] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:03 2023 kern.warn kernel: [1074416.160507] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:03 2023 kern.warn kernel: [1074416.500182] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:03 2023 kern.warn kernel: [1074416.500210] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:03 2023 kern.warn kernel: [1074416.500218] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:03 2023 kern.warn kernel: [1074416.500228] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:03 2023 kern.warn kernel: [1074416.500235] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:03 2023 kern.warn kernel: [1074416.500242] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:03 2023 kern.warn kernel: [1074416.500254] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:04 2023 kern.crit kernel: [1074417.445357] Line 0: Rate Change, us=21600, ds=101740
Fri Oct 6 22:22:04 2023 kern.warn kernel: [1074417.445377] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:04 2023 kern.warn kernel: [1074417.445396] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:04 2023 kern.warn kernel: [1074417.445403] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:05 2023 kern.crit kernel: [1074418.730458] Line 0: Rate Change, us=21600, ds=101311
Fri Oct 6 22:22:05 2023 kern.warn kernel: [1074418.730478] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:05 2023 kern.warn kernel: [1074418.730496] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:05 2023 kern.warn kernel: [1074418.730503] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:07 2023 kern.crit kernel: [1074420.015390] Line 0: Rate Change, us=21600, ds=100914
Fri Oct 6 22:22:07 2023 kern.warn kernel: [1074420.015410] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:07 2023 kern.warn kernel: [1074420.015429] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:07 2023 kern.warn kernel: [1074420.015436] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:07 2023 kern.warn kernel: [1074420.525101] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:07 2023 kern.warn kernel: [1074420.525127] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:07 2023 kern.warn kernel: [1074420.525136] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:07 2023 kern.warn kernel: [1074420.525145] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:07 2023 kern.warn kernel: [1074420.525152] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:07 2023 kern.warn kernel: [1074420.525159] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:07 2023 kern.warn kernel: [1074420.525170] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:08 2023 kern.crit kernel: [1074421.300403] Line 0: Rate Change, us=21600, ds=100516
Fri Oct 6 22:22:08 2023 kern.warn kernel: [1074421.300424] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:08 2023 kern.warn kernel: [1074421.300443] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:08 2023 kern.warn kernel: [1074421.300450] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:09 2023 kern.crit kernel: [1074422.585357] Line 0: Rate Change, us=21600, ds=100149
Fri Oct 6 22:22:09 2023 kern.warn kernel: [1074422.585376] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:09 2023 kern.warn kernel: [1074422.585395] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:09 2023 kern.warn kernel: [1074422.585402] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:11 2023 kern.crit kernel: [1074423.870364] Line 0: Rate Change, us=21600, ds=99782
Fri Oct 6 22:22:11 2023 kern.warn kernel: [1074423.870384] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:11 2023 kern.warn kernel: [1074423.870403] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:11 2023 kern.warn kernel: [1074423.870410] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:11 2023 kern.warn kernel: [1074424.550014] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:11 2023 kern.warn kernel: [1074424.550043] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:11 2023 kern.warn kernel: [1074424.550051] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:11 2023 kern.warn kernel: [1074424.550061] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:11 2023 kern.warn kernel: [1074424.550068] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:11 2023 kern.warn kernel: [1074424.550075] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:11 2023 kern.warn kernel: [1074424.550087] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:12 2023 kern.crit kernel: [1074425.155312] Line 0: Rate Change, us=21600, ds=99384
Fri Oct 6 22:22:12 2023 kern.warn kernel: [1074425.155332] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:12 2023 kern.warn kernel: [1074425.155351] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:12 2023 kern.warn kernel: [1074425.155358] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:13 2023 kern.crit kernel: [1074426.440296] Line 0: Rate Change, us=21600, ds=98987
Fri Oct 6 22:22:13 2023 kern.warn kernel: [1074426.440316] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:13 2023 kern.warn kernel: [1074426.440335] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:13 2023 kern.warn kernel: [1074426.440342] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:14 2023 kern.crit kernel: [1074427.725141] Line 0: Rate Change, us=21600, ds=98681
Fri Oct 6 22:22:14 2023 kern.warn kernel: [1074427.725161] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:14 2023 kern.warn kernel: [1074427.725180] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:14 2023 kern.warn kernel: [1074427.725187] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:15 2023 kern.warn kernel: [1074428.574936] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:15 2023 kern.warn kernel: [1074428.574963] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:15 2023 kern.warn kernel: [1074428.574971] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:15 2023 kern.warn kernel: [1074428.574981] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:15 2023 kern.warn kernel: [1074428.574989] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:15 2023 kern.warn kernel: [1074428.574996] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:15 2023 kern.warn kernel: [1074428.575007] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:16 2023 kern.crit kernel: [1074429.010264] Line 0: Rate Change, us=21600, ds=98314
Fri Oct 6 22:22:16 2023 kern.warn kernel: [1074429.010284] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:16 2023 kern.warn kernel: [1074429.010303] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:16 2023 kern.warn kernel: [1074429.010310] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:17 2023 kern.crit kernel: [1074430.295275] Line 0: Rate Change, us=21600, ds=97977
Fri Oct 6 22:22:17 2023 kern.warn kernel: [1074430.295296] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:17 2023 kern.warn kernel: [1074430.295314] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:17 2023 kern.warn kernel: [1074430.295321] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:18 2023 kern.crit kernel: [1074431.580048] Line 0: Rate Change, us=21600, ds=97610
Fri Oct 6 22:22:18 2023 kern.warn kernel: [1074431.580068] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:18 2023 kern.warn kernel: [1074431.580087] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:18 2023 kern.warn kernel: [1074431.580093] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:19 2023 kern.warn kernel: [1074432.599858] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:19 2023 kern.warn kernel: [1074432.599887] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:19 2023 kern.warn kernel: [1074432.599895] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:19 2023 kern.warn kernel: [1074432.599904] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:19 2023 kern.warn kernel: [1074432.599911] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:19 2023 kern.warn kernel: [1074432.599918] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:19 2023 kern.warn kernel: [1074432.599930] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:20 2023 kern.crit kernel: [1074432.865283] Line 0: Rate Change, us=21600, ds=97274
Fri Oct 6 22:22:20 2023 kern.warn kernel: [1074432.865303] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:20 2023 kern.warn kernel: [1074432.865321] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:20 2023 kern.warn kernel: [1074432.865328] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:21 2023 kern.crit kernel: [1074434.150054] Line 0: Rate Change, us=21600, ds=96907
Fri Oct 6 22:22:21 2023 kern.warn kernel: [1074434.150074] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:21 2023 kern.warn kernel: [1074434.150093] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:21 2023 kern.warn kernel: [1074434.150100] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:22 2023 kern.crit kernel: [1074435.435197] Line 0: Rate Change, us=21600, ds=96509
Fri Oct 6 22:22:22 2023 kern.warn kernel: [1074435.435217] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:22 2023 kern.warn kernel: [1074435.435236] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:22 2023 kern.warn kernel: [1074435.435243] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:23 2023 kern.warn kernel: [1074436.624773] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:23 2023 kern.warn kernel: [1074436.624800] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:23 2023 kern.warn kernel: [1074436.624808] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:23 2023 kern.warn kernel: [1074436.624818] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:23 2023 kern.warn kernel: [1074436.624826] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:23 2023 kern.warn kernel: [1074436.624832] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:23 2023 kern.warn kernel: [1074436.624844] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:23 2023 kern.crit kernel: [1074436.720211] Line 0: Rate Change, us=21600, ds=96142
Fri Oct 6 22:22:23 2023 kern.warn kernel: [1074436.720229] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:23 2023 kern.warn kernel: [1074436.720247] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:23 2023 kern.warn kernel: [1074436.720254] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:25 2023 kern.crit kernel: [1074438.005161] Line 0: Rate Change, us=21600, ds=95775
Fri Oct 6 22:22:25 2023 kern.warn kernel: [1074438.005181] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:25 2023 kern.warn kernel: [1074438.005199] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:25 2023 kern.warn kernel: [1074438.005206] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:26 2023 kern.crit kernel: [1074439.290122] Line 0: Rate Change, us=21600, ds=95469
Fri Oct 6 22:22:26 2023 kern.warn kernel: [1074439.290142] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:26 2023 kern.warn kernel: [1074439.290161] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:26 2023 kern.warn kernel: [1074439.290168] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:27 2023 kern.crit kernel: [1074440.575200] Line 0: Rate Change, us=21600, ds=95163
Fri Oct 6 22:22:27 2023 kern.warn kernel: [1074440.575220] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:27 2023 kern.warn kernel: [1074440.575238] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:27 2023 kern.warn kernel: [1074440.575245] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:27 2023 kern.warn kernel: [1074440.654696] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:27 2023 kern.warn kernel: [1074440.654722] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:27 2023 kern.warn kernel: [1074440.654729] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:27 2023 kern.warn kernel: [1074440.654739] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:27 2023 kern.warn kernel: [1074440.654746] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:27 2023 kern.warn kernel: [1074440.654753] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:27 2023 kern.warn kernel: [1074440.654764] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:29 2023 kern.crit kernel: [1074441.860084] Line 0: Rate Change, us=21600, ds=94826
Fri Oct 6 22:22:29 2023 kern.warn kernel: [1074441.860104] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:29 2023 kern.warn kernel: [1074441.860123] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:29 2023 kern.warn kernel: [1074441.860130] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:30 2023 kern.crit kernel: [1074443.145071] Line 0: Rate Change, us=21600, ds=94582
Fri Oct 6 22:22:30 2023 kern.warn kernel: [1074443.145091] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:30 2023 kern.warn kernel: [1074443.145110] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:30 2023 kern.warn kernel: [1074443.145117] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:31 2023 kern.crit kernel: [1074444.430130] Line 0: Rate Change, us=21600, ds=94306
Fri Oct 6 22:22:31 2023 kern.warn kernel: [1074444.430150] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:31 2023 kern.warn kernel: [1074444.430169] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:31 2023 kern.warn kernel: [1074444.430176] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:31 2023 kern.warn kernel: [1074444.679617] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:31 2023 kern.warn kernel: [1074444.679646] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:31 2023 kern.warn kernel: [1074444.679654] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:31 2023 kern.warn kernel: [1074444.679663] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:31 2023 kern.warn kernel: [1074444.679671] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:31 2023 kern.warn kernel: [1074444.679678] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:31 2023 kern.warn kernel: [1074444.679689] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:32 2023 kern.crit kernel: [1074445.715085] Line 0: Rate Change, us=21600, ds=94062
Fri Oct 6 22:22:32 2023 kern.warn kernel: [1074445.715105] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:32 2023 kern.warn kernel: [1074445.715124] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:32 2023 kern.warn kernel: [1074445.715131] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:34 2023 kern.crit kernel: [1074447.000020] Line 0: Rate Change, us=21600, ds=93878
Fri Oct 6 22:22:34 2023 kern.warn kernel: [1074447.000040] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:34 2023 kern.warn kernel: [1074447.000059] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:34 2023 kern.warn kernel: [1074447.000066] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:35 2023 kern.crit kernel: [1074448.285016] Line 0: Rate Change, us=21600, ds=93695
Fri Oct 6 22:22:35 2023 kern.warn kernel: [1074448.285035] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:35 2023 kern.warn kernel: [1074448.285053] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:35 2023 kern.warn kernel: [1074448.285060] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:35 2023 kern.warn kernel: [1074448.704531] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:35 2023 kern.warn kernel: [1074448.704560] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:35 2023 kern.warn kernel: [1074448.704568] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:35 2023 kern.warn kernel: [1074448.704577] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:35 2023 kern.warn kernel: [1074448.704585] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:35 2023 kern.warn kernel: [1074448.704592] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:35 2023 kern.warn kernel: [1074448.704603] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:36 2023 kern.crit kernel: [1074449.570038] Line 0: Rate Change, us=21600, ds=93419
Fri Oct 6 22:22:36 2023 kern.warn kernel: [1074449.570059] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:36 2023 kern.warn kernel: [1074449.570078] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:36 2023 kern.warn kernel: [1074449.570085] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:38 2023 kern.crit kernel: [1074450.855003] Line 0: Rate Change, us=21600, ds=93175
Fri Oct 6 22:22:38 2023 kern.warn kernel: [1074450.855024] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:38 2023 kern.warn kernel: [1074450.855043] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:38 2023 kern.warn kernel: [1074450.855050] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:39 2023 kern.crit kernel: [1074452.140007] Line 0: Rate Change, us=21600, ds=92991
Fri Oct 6 22:22:39 2023 kern.warn kernel: [1074452.140027] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:39 2023 kern.warn kernel: [1074452.140046] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:39 2023 kern.warn kernel: [1074452.140053] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:39 2023 kern.warn kernel: [1074452.729452] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:39 2023 kern.warn kernel: [1074452.729481] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:39 2023 kern.warn kernel: [1074452.729488] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:39 2023 kern.warn kernel: [1074452.729498] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:39 2023 kern.warn kernel: [1074452.729505] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:39 2023 kern.warn kernel: [1074452.729512] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:39 2023 kern.warn kernel: [1074452.729523] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:40 2023 kern.crit kernel: [1074453.424967] Line 0: Rate Change, us=21600, ds=92746
Fri Oct 6 22:22:40 2023 kern.warn kernel: [1074453.424988] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:40 2023 kern.warn kernel: [1074453.425007] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:40 2023 kern.warn kernel: [1074453.425015] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:41 2023 kern.crit kernel: [1074454.709927] Line 0: Rate Change, us=21600, ds=92532
Fri Oct 6 22:22:41 2023 kern.warn kernel: [1074454.709948] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:41 2023 kern.warn kernel: [1074454.709967] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:41 2023 kern.warn kernel: [1074454.709974] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:43 2023 kern.crit kernel: [1074455.994904] Line 0: Rate Change, us=21600, ds=92349
Fri Oct 6 22:22:43 2023 kern.warn kernel: [1074455.994924] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:43 2023 kern.warn kernel: [1074455.994943] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:43 2023 kern.warn kernel: [1074455.994950] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:43 2023 kern.warn kernel: [1074456.754362] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:43 2023 kern.warn kernel: [1074456.754391] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:43 2023 kern.warn kernel: [1074456.754400] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:43 2023 kern.warn kernel: [1074456.754409] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:43 2023 kern.warn kernel: [1074456.754417] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:43 2023 kern.warn kernel: [1074456.754424] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:43 2023 kern.warn kernel: [1074456.754436] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:44 2023 kern.crit kernel: [1074457.279880] Line 0: Rate Change, us=21600, ds=92135
Fri Oct 6 22:22:44 2023 kern.warn kernel: [1074457.279900] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:44 2023 kern.warn kernel: [1074457.279918] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:44 2023 kern.warn kernel: [1074457.279925] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:45 2023 kern.crit kernel: [1074458.564916] Line 0: Rate Change, us=21600, ds=91982
Fri Oct 6 22:22:45 2023 kern.warn kernel: [1074458.564937] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:45 2023 kern.warn kernel: [1074458.564956] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:45 2023 kern.warn kernel: [1074458.564963] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:47 2023 kern.crit kernel: [1074459.849868] Line 0: Rate Change, us=21600, ds=91829
Fri Oct 6 22:22:47 2023 kern.warn kernel: [1074459.849888] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:47 2023 kern.warn kernel: [1074459.849908] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:47 2023 kern.warn kernel: [1074459.849915] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:48 2023 kern.warn kernel: [1074460.779287] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:48 2023 kern.warn kernel: [1074460.779316] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:48 2023 kern.warn kernel: [1074460.779324] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:48 2023 kern.warn kernel: [1074460.779334] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:48 2023 kern.warn kernel: [1074460.779341] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:48 2023 kern.warn kernel: [1074460.779348] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:48 2023 kern.warn kernel: [1074460.779360] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4
Fri Oct 6 22:22:48 2023 kern.crit kernel: [1074461.134863] Line 0: Rate Change, us=21600, ds=91706
Fri Oct 6 22:22:48 2023 kern.warn kernel: [1074461.134881] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:48 2023 kern.warn kernel: [1074461.134900] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:48 2023 kern.warn kernel: [1074461.134908] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:49 2023 kern.crit kernel: [1074462.419821] Line 0: Rate Change, us=21600, ds=91584
Fri Oct 6 22:22:49 2023 kern.warn kernel: [1074462.419841] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:49 2023 kern.warn kernel: [1074462.419860] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:49 2023 kern.warn kernel: [1074462.419867] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:50 2023 kern.crit kernel: [1074463.704801] Line 0: Rate Change, us=21600, ds=91523
Fri Oct 6 22:22:50 2023 kern.warn kernel: [1074463.704821] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:50 2023 kern.warn kernel: [1074463.704840] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:50 2023 kern.warn kernel: [1074463.704847] bcmxtmcfg: PendEvt1 LI, P=0, S=1
Fri Oct 6 22:22:52 2023 kern.warn kernel: [1074464.806212] bcmxtmcfg: ULS Port 0
Fri Oct 6 22:22:52 2023 kern.warn kernel: [1074464.806241] bcmxtmcfg: XTM Link Mode is VDSL G.inpRtx
Fri Oct 6 22:22:52 2023 kern.warn kernel: [1074464.806249] bcmxtmcfg:ulPhysPort[0] m_ulTrafficMonitorPort[0]
Fri Oct 6 22:22:52 2023 kern.warn kernel: [1074464.806258] bcmxtmcfg: XTM LinkInfo. P-0, S-UP(1), Service =PTM(2)
Fri Oct 6 22:22:52 2023 kern.warn kernel: [1074464.806265] bcmxtmcfg: ReconfSAR P-0, T-2
Fri Oct 6 22:22:52 2023 kern.warn kernel: [1074464.806272] bcmxtmcfg: TxPAF Status = Disabled
Fri Oct 6 22:22:52 2023 kern.warn kernel: [1074464.806283] bcmxtmcfg: ChkSILI Port = 0, BondingPort = 4

@Hadx può esserci qualche guasto lato armadio?

MiloZ

fra20
Dai log si direbbe che lo SRA sia andato a rimodulare gradualmente la portante al ribasso probabilmente per riportare l'SNRm intorno si 6dB.
La causa possiamo solo ipotizzarla, o qualche linea in diafonia o qualche altra sorta di disturbo esterno.

fra20

Filippo94 ho provato a riavviare il router poco fa, purtroppo mi riaggancia 94🙁

Filippo94

fra20 le statistiche sono invariate?

fra20

Filippo94 si, assolutamente sovrapponibili a prima, non riesco proprio a capire 🤔

fra20

Filippo94

MiloZ
noto anche che stamattina sono aumentati di molto gli errori FEC ed iniziano a comparire errori crc:

Kibbutz90

Ma piuttosto (e chiedo ai più esperti) è normale che SNR sia sotto i 6db?

Nick1997

Kibbutz90 Se il rumore(disturbo dovuto spesso dalla distonia) aumenta si

Kibbutz90

Nick1997 Aumenta, ma qua è diminuito a 5.8db è quello che mi stranisce. So che quando scende sotto il 6 può creare problemi.

Nick1997

Kibbutz90 Se il rumore, con rumore intendo i disturbi, aumentano il margine di rumore (snr) diminuisce, se l’snr diminuisce troppo interviene l’sra per portarlo al valore impostato dal profilo.

Kibbutz90

Nick1997 Capisco, quindi in questo caso il problema non è quello.

fra20

Aggiornamento, dopo aver aperto una segnalazione con l'assistenza (ottima devo dire), è intervenuto un tecnico e tutto è stato ripristinato:

speriamo che duri, mi è stato detto che il rame della tratta armadio - chiostrina non è nelle migliori condizioni...

fra20

Altro aggiornamento... Stasera mi ritrovo così:

Qualcuno avrà disattivato la sua linea? Strane queste oscillazioni...

Nick1997

fra20 O semplicemente qualcuno potrebbe aver spento il modem

fra20

Nick1997 Ho avuto modo di controllare, effettivamente quando il vicino di casa spegne il modem, la portante sale a 130

Informativa privacy - Informativa cookie - Termini e condizioni - Regolamento - Disclaimer - 🏳️‍🌈 🇵🇸
P.I. IT16712091004 - info@fibraclick.it

♻️ Il server di questo sito è alimentato al 100% con energia rinnovabile