5530 per FTTH TIM (FiberCop)

renton82 · 2022-01-27T06:11:00+00:00

Sapete per caso se questo appartamento è compatibile con la fibra di TIM? Al momento sembra l'unico che potrei usare per la fibra 2,5.

simonebortolin

sursumcorda Yep fatta ad hoc per unidata

sursumcorda

simonebortolin Yep fatta ad hoc per unidata

Allora forse è più una custom che una labor (beta).
Immagino si debba conoscere un link speciale per scaricarla.

simonebortolin

sursumcorda No è una custom basata su un labor

sestarus

mastro65 Hi, I am having some troubles with connecting 5530 to local provider mtel/ba. Tried with different firmwares (from 7.26 to the latest lab/inhaus) and different images official/freetz, but without success. 5530 reach O5 status, but it goes back to O2 or O3. Can you help with your expertise? Thanks 🙂

simonebortolin

sestarus 5530 reach O5 status, but it goes back to O2 or O3. Can you help with your expertise? Thanks 🙂

you'll be on olt zte, you have to ask avm why it behaves like that.

sestarus

simonebortolin Could be that I am on ZTE. Could you please tell me how can I confirm it? I have great experience with zte vdsl modem, much better than with huawei. Right now my provider supplied me with HG8245h5 and it works well for most basic needs. I have tried to bridge both voip vlan and internet vlan on a single lan port in order to use it in conjuction with fb 5530 wan port to have sip/internet managed via FB, but w/o sucess. I have managed to get shell access, but it did not help much. I found some interesting info, but what I was looking for. Managed to get credentials for pppoe, sip and so on. Could be that I just do not see what I need. I have also contacted local distributor of AVM here originally wanted to purchase 5590 and advised to try with 5530, bla, bla. The local distributor asked me collect bunch of logs through support page and send to them. I even supplied more and sent some logs from huawei in order to enhance the chance of problem being solved. Tried to contact AVM, waited for two weeks and they informed me to contact my provider and support them with avm gpon serial and they should be able to give me the access. Will see. According to their response, they offer everything what is unnecessary and want to 'help' when there is no need. Bunch of no no's and yo yo's. Still waiting from my local telco for response. I have used 7390, 7490 before and they are great devices.

I am not sure if purchase of 5590 along with freetz firmware will solved my issue.

According to pppoe log mac Nokia ONT or part of it is used for establishing pppoe.

I hope will be able to connect fb straight to fiber w/o any unnecessary loops.

Thanks for your reply.

simonebortolin

sestarus Could you please tell me how can I confirm it?

Since:

sestarus now my provider supplied me with HG8245h5

Enter in telnet (see https://hack-gpon.github.io/ont-huawei-hg8010h/) and run the command for olt vendor https://hack-gpon.github.io/ont-huawei-hg8010h/#getting-the-olt-vendor

I am not sure if purchase of 5590 along with freetz firmware will solved my issue.

According to pppoe log mac Nokia ONT or part of it is used for establishing pppoe.

if there was a nokia olt it would have to be a fixed o5 without vlan.

I hope will be able to connect fb straight to fiber w/o any unnecessary loops.

I don't think it is possible

sestarus

So, responses:

WAP>omcicmd mib show meid 131 instid 0

Me(OLT-G), instance(0x0), instance size is 54

Att1, AttSize = 0x4, AttContent: 48575443
Att2, AttSize = 0x14, AttContent: 00000000 00000000 00000000 00000000 00000000
Att3, AttSize = 0xe, AttContent: 31300000 00000000 00000000 0000
Att4, AttSize = 0xe, AttContent: 00000000 00000000 00000000 0000

success!
WAP>omcicmd mib show meid 7 instid 0

Me(Software Image), instance(0x0), instance size is 19

Att1, AttSize = 0xe, AttContent: 56355230 31394330 30533132 3500
Att2, AttSize = 0x1, AttContent: 01
Att3, AttSize = 0x1, AttContent: 01
Att4, AttSize = 0x1, AttContent: 01

success!
WAP>omcicmd mib show meid 7 instid 1

Me(Software Image), instance(0x1), instance size is 19

Att1, AttSize = 0xe, AttContent: 56355230 31394330 30533132 3500
Att2, AttSize = 0x1, AttContent: 00
Att3, AttSize = 0x1, AttContent: 00
Att4, AttSize = 0x1, AttContent: 01

success!
WAP>omcicmd mib show meid 256 instid 0

Me(ONT-G), instance(0x0), instance size is 73

Att1, AttSize = 0x4, AttContent: 48575443
Att2, AttSize = 0xe, AttContent: 31353044 2e410000 00000000 0000
Att3, AttSize = 0x8, AttContent: 2a2a2a2a 2a2a2a2a
Att4, AttSize = 0x1, AttContent: 00
Att5, AttSize = 0x1, AttContent: 00
Att6, AttSize = 0x1, AttContent: 00
Att7, AttSize = 0x1, AttContent: 00
Att8, AttSize = 0x1, AttContent: 00
Att9, AttSize = 0x1, AttContent: 00
Att10, AttSize = 0x18, AttContent: 2a2a2a2a 2a2a2a2a 2a2a2a2a 2a2a2a2a 2a2a2a2a 2a2a2a2a
Att11, AttSize = 0xc, AttContent: 2a2a2a2a 2a2a2a2a 2a2a2a2a
Att12, AttSize = 0x1, AttContent: 00
Att13, AttSize = 0x2, AttContent: 0001

success!
WAP>omcicmd mib show meid 257 instid 0

Me(ONT2-G), instance(0x0), instance size is 44

Att1, AttSize = 0x14, AttContent: 48473832 34354835 00000000 00000000 00000000
Att2, AttSize = 0x1, AttContent: b0
Att3, AttSize = 0x2, AttContent: 0150
Att4, AttSize = 0x1, AttContent: 01
Att5, AttSize = 0x1, AttContent: 01
Att6, AttSize = 0x2, AttContent: 0040
Att7, AttSize = 0x1, AttContent: 02
Att8, AttSize = 0x1, AttContent: 01
Att9, AttSize = 0x2, AttContent: 0020
Att10, AttSize = 0x4, AttContent: 00000000
Att11, AttSize = 0x2, AttContent: 007d
Att12, AttSize = 0x1, AttContent: 00
Att13, AttSize = 0x2, AttContent: 0018
Att14, AttSize = 0x2, AttContent: 0001

success!
WAP>

It looks like everything is HW. Also, I broke my 1st modem, purchased another used. just entered gpon serial and reconfigured itself automaticall, it was only good experience with this platform. I am sure that HW make great products however, my isp opted for cheapest possible alternative. I wish i am living in CH... 😉

simonebortolin

sestarus Att1, AttSize = 0x4, AttContent: 48575443

Olt Huawei

You must have a very recent version of the huawei olt firmware that backlists the avm product and in your 5530 you cannot change equpment id and software version. Another case like this has already happened. There is nothing you can do about it. Huawei put a ban in the new software versions to the avm onts because most likely the small isps were clogging up their support.

sestarus nop

sestarus

I am sure that technically FB can emulate everything the same way as will ma5671a or leox or uplink do. It is probably decision of AVM not to make it easily public accessible.

Local distributor claimed that 5590 had some issue with FW for multicast, in my case is not much relevant. I do not watch tv a lot, also there are much better world platforms than those locally supplied who is interested in tv. The best are obviously not free, but they are not so expensive either for someone who is hungry for real time sport events at 8k or the latest Bollywood production...

Any suggestions from?

Thanks in adv!

sestarus

simonebortolin

AFAIK the results from my query are earlier that for example the results posted on hack gpon site.

In terms of HW ban, AVM devices operate well in DE on HW infrastructure, large and small DT, DE GF, to name a few.

As for time being, it will be solved via Media converter, but this only about market share, politics and so on.

Nothing to do with technology. Once I had a problem with ATT service while living in US. They gave me bunch of answers until I praised their service on dslreports.com from inventors of c, unix, c++, ..

I got call back and the issue was resolved with two commands, very disappointing comparing to service of DT or NTT or ...

Just way of thinking I assume...

Anyhow thanks for your insight

simonebortolin

sestarus AFAIK the results from my query are earlier that for example the results posted on hack gpon site.

I thought you had executed the commands

In terms of HW ban, AVM devices operate well in DE on HW infrastructure, large and small DT, DE GF, to name a few.

if they have older firmware versions or have paid huawei to de-block it yes, but by default in new versions it is blocked.

As for time being, it will be solved via Media converter, but this only about market share, politics and so on.

sestarus Nothing to do with technology. Once I had a problem with ATT service while living in US. They gave me bunch of answers until I praised their service on dslreports.com from inventors of c, unix, c++, ..

I got call back and the issue was resolved with two commands, very disappointing comparing to service of DT or NTT or ...

Just way of thinking I assume...

Anyhow thanks for your insight

We know that the 5530/5590 only run on olt huawei with older software versions

It doesn't go on olt zte (it does o5-o2-o5-o2 don't know if other states in between)

Does not work on olt nokia (fake o5 - see hack gpon for more info)

actually there are a lot of compatibility problems between ont and olt, but vendors like nokia/huawei put physical "limits" as they block everything that is not authorised and so you have to change software version, hardware version and equipment id and/or get it whitelisted by the network operator, bitterly it's not like GPON, today's news the italian ISP TIM is charging 50k€ to add third party ont support to their network from isps selling on tim FTTH (i know it's in italian, but read the deliberation of italian autority of competition - https://www.agcom.it/documents/10179/30173248/Delibera+11-23-CIR/8b5bf27d-31ca-46f8-9ff2-26cb463b4351?version=1.0) there is a list of proceudre and problems for third-party ONTs.

while some users, suspect a real OMCI compatibility problem for the zte, as I remind you that the ITU standard for GPON is easily interpreted in several ways and the various manufacturers put dozens of ifs in their software for each olt vendor, where they really change details.

« Pagina precedente

Informativa privacy - Informativa cookie - Termini e condizioni - Regolamento - Disclaimer - 🏳️‍🌈 🇵🇸
P.I. IT16712091004 - info@fibraclick.it

♻️ Il server di questo sito è alimentato al 100% con energia rinnovabile