MiloZ
Mi autoquoto avendo acquistato da poco un Hopper DSL.
Nell'interfaccia web mancano diverse cose relativamente alle statistiche xdsl, ma generando il rapporto dei log come file txt c'è scritto tutto. 👌
Copio un pò di dati:
DSL link status: showtime
Uptime: 08:43:41
Mode: ITU G.993.2 (VDSL2), G.998.4 (G.INP)
TPSTC: 64B/65B PTM TC
VDSL profile: 35b
Annex: B
Near-end ITU ID: b5004244434dc21a
Far-end ITU ID: 26005443434e5c17
FW version: 5.12.23.8_B_A60901
HW version: T14.F7_0.0
Driver version: 1.0.50-1
Training and handshake time: 00:00:23
Cell-delineation errors: 0
Link retrains: 1
Initialization errors: 2
Initialization timeouts: 0
Loss of framing: no
Loss of framing errors: 0
Error period (sec): 0
Severe error period (sec): 0
Link power state: L0 (full)
Last line drop reason: no drops
Electrical loop length (dB): 1.8
DS US
Interleaved (Kbps): 178210 0
Fast (Kbps): 0 21599
Maximum (Kbps): 195972 27556
Attain (Kbps): 214335 36274
Interleave depth: 16 1
Interleave delay (ms): 0.00 0.00
FEC errors fast: 0 2083
CRC errors fast: 0 0
HEC errors fast: 0 0
FEC errors interleaved: 9089 0
CRC errors interleaved: 0 0
HEC errors interleaved: 0 0
Line capacity (%): 100 100
Noise margin (dB): 6.0 12.8
Output power (dBm): 13.3 -24.6
Attenuation (dB): 3.1 0.0
RFC 2662 blocks: 489061 489060
M: 1 0
T: 0 0
R: 6 8
S: 0.04 0.10
L: 45970 6079
RS words: 802933312 308176384
OCD errors: 0 0
LCD errors: 0 0
Total cells: 205524922 0
Dropped cells: 0 0
Errored seconds (ES): 0 0
Severly errored seconds (SES): 0 0
Unavailable seconds (UAS): 25 25
Super frames: 0 0
Super frame errors: 0 0
Bit errors: 0 0
ATU-C/ATU-R ANSI revision: 0 0
ATU-C/ATU-R ANSI standard: 0 0
Trellis code: on on
Virtual noise mechanism: off off
SNR margin (dB)
Band 0: 5.8 12.8
Band 1: 5.6 12.8
Band 2: 5.7 12.7
Band 3: N/A 12.8
Band 4: N/A N/A
Line attenuation (dB)
Band 0: 3.1 0.0
Band 1: 5.0 3.1
Band 2: 12.1 6.0
Band 3: N/A 8.1
Band 4: N/A N/A
Signal attenuation (dB)
Band 0: 5.3 0.0
Band 1: 4.3 3.1
Band 2: 11.3 5.5
Band 3: N/A 7.8
Band 4: N/A N/A
Per il G.INP:
[31472] G.inp parameter:
[31472] near-end err dtu counter: 0
[31472] near-end correct dtu counter: 124
[31472] far-end tx dtu counter: 124
[31472] near-end rtx-tx(RXPHYR HW) counter: 95
[31472] near-end all receive dtu counter: 188876435
[31472] near-end act shine value: 550
[31472] near-end act rein value: 0
[31472] near-end ETR value: 176410
[31472] near-end act delay rtx: 0
[31472] near-end leftr seconds: 0
[31472] near-end error free bit counter: 85445453
[31472] near-end error free throughput rate: 174080
[31472] near-end min error free throughput rate: 174080
[31472] far-end err dtu counter: 0
[31472] far-end correct dtu counter: 321
[31472] near-end tx dtu counter: 339
[31472] far-end act shine value: 590
[31472] far-end act rein value: 0
[31472] far-end ETR value: 21382
[31472] far-end act delay rtx: 0
[31472] far-end leftr seconds: 154
[31472] far-end error free bit counter: 649927473
[31472] far-end min error free throughput rate: 21593
Riguardo il tipo di piastra lato ONU, pare segni soltanto la stringa senza indicare il vendor preciso (vabè che in FTTC son tutti BDCM praticamente):
Near-end ITU ID: b5004244434dc21a
Far-end ITU ID: 26005443434e5c17
