Mikrotik Corner - Guide, informazioni e aiuti sugli apparati Mikrotik

LSan83 no ,non ero a conoscenza di questa cosa.
attivo subito

LSan83 A 1Mbps però mi pare, senza licenza... Come fa ad andare a pieno l'upload? O non passa per le CHR, o qualcosa non mi torna.

ermanno
Per capirci.. stai "testando" cosa ?
Hai hardware mikrotik o stai usando CHR o il software installato su macchine x86 ?

ermanno
È strano perchè sia con la trial (livello 0) che la free (livello 1) dovrebbero essere limitate a 1Mbit.
Magari con la versione 7 hanno cambiato i limiti ?

Che hardware hai ? CPU ? RAM ?
Guarda il carico sulla CPU.

Technetium come hardware ho:
cpu amd64 athlon 3500+
ram 2gb
lan rtl8169

Technetium Guarda il carico sulla CPU.

mi sembra che non vada oltre il 40%, ma appena posso guardo meglio.

@Heavy come è possibile provare qualche modello un pochino più serio, che abbia porte a 10G, faccia routing dinamico (ospf e bgf) e switching in maniera decente?

What's new in 7.4beta4 (2022-Jun-15 14:04):

) container - added support for running Docker (TM) containers on ARM, ARM64 and x86;
) defconf - fixed default configuration loading on devices with WifiWave2 package;
) dhcp-relay - fixed DHCPv6 relay forward and reply creation (introduced in v7.1.3);
) dhcp-server - change "vendor-class-id" matcher to generic option matcher;
) dot1x - fixed "undo" command for server instances;
) l2tp - improved stability when establishing l2tp-ether connection (introduced in v7.3);
) leds - fixed GPS LED configuration on LtAP LTE kit;
) leds - fixed LTE signal strength LED configuration on LHGG LTE kit;
) leds - fixed LTE signal strength LED configuration on LtAP LTE kit;
) lte - added AT chat support for Dell dw5821e modem;
) lte - fixed LTE interface running state after modem reconnection;
) mqtt - fixed socket error handling;
) netwatch - added support for more advanced probing;
) ovpn - fixed "called-station-id" RADIUS attribute value for OVPN server;
) ppp - do not fail connection when trying to add existing IP address to address list;
) ppp - log warning message when remote IP address can not be added;
) route - changed "mode" setting to "exclude" for group management protocol (CLI only);
) route - made export run faster on tables with a large number of dynamic routes;
) routing-filter - added origin matcher to match for example routes of a specific OSPF instance;
) routing-filter - made "do-jump" work in select rules;
) ssh - fixed host key generation (introduced in v7.3);
) switch - fixed multicast flooding when HW offloaded bridge port gets disabled;
) system - fixed configuration reset with "run-after-reset" with file stored on ramdisk;
) upgrade - improved RouterOS upgrade stability with attached USB modem on MIPSBE, SMIPS and MMIPS devices;
) w60g - improved interface initialization after being inactive for a while;
) wifiwave2 - added initial support for roaming (802.11r) between local AP interfaces;
) winbox - fixed filename dropdown value filtering;
) x86 - fixed Broadcom NIC support.

Tornano

What's new in 7.4 (2022-Jul-19 14:25):

• Container package is not available in v7.4. Development and testing continues in "testing" channel.

Changes in this release:
*) api - fixed comma encoding within URL when using the ".proplist" argument;
*) bridge - properly process IPsec decapsulated packets through the firewall when the "use-ip-firewall" option is enabled;
*) capsman - require a unique name for configuration and configuration pre-sets;
*) certificate - fixed new CRL updating;
*) chr - fixed booting with added additional SCSI disk;
*) cloud - print critical log message when system clock gets synchronized;
*) console - added ":retry" command;
*) console - fixed situation when print output was not consistent;
*) defconf - fixed default configuration loading on devices with WifiWave2 package;
*) dhcp-relay - fixed DHCPv6 relay forward and reply creation (introduced in v7.1.3);
*) dhcp-server - change "vendor-class-id" matcher to generic option matcher;
*) dhcpv4-server - disallowed overriding message type option;
*) dhcpv4-server - log message when user option updates existing option;
*) dhcpv4-server - placed option 53 as the first one in the packet;
*) dns - convert the domain name to lowercase before matching regex;
*) dot1x - fixed "undo" command for server instances;
*) e-mail - added VRF support;
*) filesystem - fixed repartition on RB5009 series devices;
*) firewall - added "srcnat" and "dstnat" flags to IPv6/Firewall/Connection table;
*) firewall - added support for IPv6/Firewall/NAT action=src-nat rules;
*) firewall - fixed IPv6 NAT functionality when processing GRE traffic on TILE devices;
*) firewall - fixed IPv6/Firewall/RAW functionality;
*) firewall - include "connection-mark", "connection-state", and "packet-mark" when packet logging is enabled;
*) firewall - properly handle interface matcher when VRF interface is specified;
*) health - fixed requesting data from sensor when issuing "get" command;
*) health - fixed voltage reporting on some RBmAP-2nD devices;
*) hotspot - fixed ARP resolution for clients when address pool is specified on the server;
*) hotspot - fixed Walled Garden entries with action=deny;
*) ipv6 - fixed system stability when adding/removing IPv6 address;
*) l2tp - improved stability when establishing l2tp-ether connection (introduced in v7.3);
*) ldp - correctly handle AFI selection for usage on dual-stack peers;
*) leds - fixed GPS LED configuration on LtAP LTE kit;
*) leds - fixed LTE signal strength LED configuration on LHGG LTE kit;
*) leds - fixed LTE signal strength LED configuration on LtAP LTE kit;
*) lte - added AT chat support for Dell dw5821e modem;
*) lte - fixed LTE interface running state after modem reconnection;
*) lte - fixed Telit AT interface numbering;
*) lte - improved LTE interface detection for LtAP-2HnD devices;
*) lte - keep MBIM working even if AT channel fails to respond in the initialization stage;
*) lte - request connect with the same IP type as in LTE attach status for MBIM;
*) lte - show current value for "antenna" parameter when auto antenna selection fails;
*) lte - validate LTE attached IP type in MBIM mode;
*) mmips - improved USB device detection after system bootup;
*) mpls - fixed VPLS functionality when PW peer is an immediate neighbor;
*) mpls - improved stability with enabled loop-detect;
*) mqtt - fixed log flooding with disconnect messages;
*) mqtt - fixed socket error handling;
*) netwatch - added support for more advanced probing;
*) ntp - added VRF support for client and server;
*) ntp - fixed manycast server support;
*) ntp - improved "debug" log level logging;
*) ovpn - added "AUTH_FAILED" control message sending;
*) ovpn - fixed "called-station-id" RADIUS attribute value for OVPN server;
*) ovpn - use selected cipher by default when the server does not provide "cipher" option;
*) pimsm - improved system stability when changing configuration;
*) poe - hide "poe-voltage" parameter on devices that do not support it;
*) ppp - do not fail connection when trying to add existing IP address to address list;
*) ppp - log warning message when remote IP address can not be added;
*) ppp - properly try to use different authentication algorithms when Conf-Rej is received during the LCP phase;
*) quickset - specify the "in-interface-list=WAN" attribute on firewall rules created through "Port Mapping";
*) radius - added VRF support for RADIUS client;
*) route - added option to join static IGMP and MLD groups (available in "/routing/gmp" menu);
*) route - expose all valid routes to route select filter from BGP;
*) route - expose all valid routes to route select filter from OSPF and RIP;
*) route - fixed false route type detection as blackhole;
*) route - fixed log messages when changing routing configuration;
*) route - made export run faster on tables with a large number of dynamic routes;
*) route - provide more detailed information about prefixes when using "discourse" tool;
*) route-filter - fixed route select filter rules;
*) routing - moved "/interface bgp vpls" to "/routing bgp vpls" menu;
*) routing-filter - added origin matcher to match for example routes of a specific OSPF instance;
*) routing-filter - fixed regexp community matcher;
*) routing-filter - made "do-jump" work in select rules;
*) rpki - fix potential memory leak;
*) ssh - disable ssh-rsa when strong-crypto=yes and use rsa-sha2-sha256;
*) ssh - fixed host key generation (introduced in v7.3);
*) ssh - implemented "server-sig-algs" extension in order to improve rsa-sha2-sha256 support;
*) switch - disabled second CPU core for CRS328-24P-4S+ device in order to improve SFP+ link stability;
*) switch - fixed multicast flooding when HW offloaded bridge port gets disabled;
*) system - added "shutdown" parameter for reset-configuration (CLI only);
*) system - fixed configuration reset with "run-after-reset" with file stored on ramdisk;
*) upgrade - ignore same version packages during upgrade procedure;
*) upgrade - improved RouterOS upgrade stability with attached USB modem on MIPSBE, SMIPS and MMIPS devices;
*) vpls - improved system stability with enabled connection tracking;
*) vxlan - allow to specify MAC address manually;
*) w60g - fixed interface "reset-configuration" on Cube 60 devices;
*) w60g - improved interface initialization after being inactive for a while;
*) w60g - improved system stability when using mismatched L2MTU between station and AP;
*) webfig - updated WebFig HTML files with the new MikroTik logo and removed Telnet option from index page;
*) webfig - updated link to the WinBox executable;
*) webfig - updated link to the documentation;
*) wifiwave2 - added initial support for roaming (802.11r) between local AP interfaces;
*) wifiwave2 - fixed "frequency-scan" functionality (introduced in v7.3);
*) wifiwave2 - improved WPA3 support stability;
*) winbox - add a log and log-prefix options to IPv6 firewall NAT and mangle rules;
*) winbox - added "name" parameter under "Routing/BGP/Session" menu;
*) winbox - added "to-address" and "to-ports" parameters under "IPv6/Firewall/NAT" menu;
*) winbox - added support for "veth" interface types;
*) winbox - fixed "inactive" flag naming under "MPLS/Local Mapping" menu;
*) winbox - fixed IP/Route and IPv6/Route OSPF type value;
*) winbox - fixed filename dropdown value filtering;
*) winbox - fixed minor typo under "Interface" stats;
*) winbox - fixed units for "reachable-time" parameter under "IPv6/ND" menu;
*) winbox - removed "TLS Host" parameter from "IP/Firewall/NAT" menu;
*) winbox - removed duplicate signal strength column under "Wireless/Registration Table" menu;
*) winbox - removed unused "Apply Changes" button from BGP sessions menu;
*) wireguard - fixed system stability when adding/removing WireGuard interface;
*) wireless - fixed possible traffic flooding to WDS clients when using Nv2 and multicast helper;
*) x86 - fixed Broadcom NIC support;
*) x86 - fixed keep old configuration functionality during x86 setup installation;
*) x86 - improved log warning message on failed downgrade attempt;
*) x86 - removed "hdd-model" information from installation screen;

E se ne vanno via di nuovo... io boh.

edofullo Per il momento me ne resto con la 7.1 (visti i problemi con lte nelle release successive) per la mia 33g. Poi se veramente hanno sistemato la parte lte valuterò.

Technetium Si ma questo continuo metti-togli

edofullo Si ma questo continuo metti-togli

Rimangono nella versione testing e li portano avanti.
Le "rc" e le "beta" hanno anche questa funzione. Ci sono segnalazioni per cui i container non funzionano bene quindi li hanno tolti dalla versione finale e ritornano in testing.

cdman La 7.4 ha risolto i problemi lte dello Chateau.
Sarebbe da provare per le altre schede.

LSan83 Si , sarà da vedere sul resto.

GioAda

E anche lo Chateau 5G ax e Chateau LTE18 ax
https://www.youtube.com/watch?v=nm9RjNbZJjc

Signori miei, sembra ci siano riusciti davvero.
Ora c'è da vedere quanto è stabile

What's new in 7.5 (2022-Aug-30 12:25):
*) bgp - fixed remote refuse capability options, max prefix limit errors and administrative stop;
*) bgp - improved stability when "default-originate" is configured;
*) bridge - fixed "new-priority" value validation for NAT rules;
*) capsman - added randomized range option for "reselect-interval" parameter (CLI only);
*) certificate - fixed handling of empty AKID by SCEP client;
*) console - fixed automatic command completion with keypress;
*) container - added support for running Docker (TM) containers on ARM, ARM64 and x86 (containers created before v7.4 must be recreated);
*) defconf - fixed loading of default configuration on RB4011 with WifiWave2 package enabled;
*) dhcpv4-server - fixed removal of dynamic leases when server is removed;
*) dhcpv6-client - moved invalid lifetime logging message from "debug" to "error" topic;
*) dhcpv6-client - use /128 prefix for IA_NA addresses;
*) dhcpv6-relay - fixed relay forwarding (introduced in v7.1.5);
*) dhcpv6-server - improved stability when acquiring binding;
*) dns - added "address-list" parameter for static DNS entries (CLI only);
*) dns - added "match-subdomain" option for static entries (CLI only);
*) firewall - added support for RTSP helper;
*) health - fixed "temperature" and "power-consumption" readings on RB1100x4;
*) health - improved voltage reading on CRS112-8P-4S;
*) health - renamed "cpu-temperature" to "switch-temperature" on CRS312-4C+8XG, CRS326-24S+2Q+, CRS354-48P-4S+2Q+, CRS354-48G-4S+2Q+, CRS504-4XQ-IN, CRS518-16XS-2XQ;
*) hostpot - fixed Walled Garden functionality for HTTPS sites;
*) hotspot - automatically reject all HTTPS requests passing through HotSpot server for unauthorized users;
*) hotspot - improved stability when receiving bogus packets;
*) hotspot - limit maximum allowed connections based on free RAM resources;
*) hotspot - removed "https-redirect" option;
*) ike2 - allow sending certificate chain as initiator;
*) interface - fixed default interface naming on RB1100x2;
*) l3hw - fixed HW offloaded NAT;
*) leds - fixed default LED configuration for RBwsAP-5Hac2nD;
*) leds - fixed wireless LED functionality on LHGG;
*) lora - do not ignore negative sign for spoofed GPS coordinates;
*) lte - added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
*) lte - added at-chat support for Simcom modems, USB composition (device id - 0x9005);
*) lte - added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
*) lte - changed cell ID info display to short format for 3G connections;
*) lte - disallow empty APN name only for default entry;
*) lte - fixed AT channel for Sierra Wireless modems with device ID 0x9091;
*) lte - fixed LTE interface presence for Telit LN940;
*) lte - fixed UDP performance on MMIPS devices;
*) lte - improved antenna scan for Chateau devices with switchable antennas;
*) lte - improved configuration export when multiple LTE interfaces are present;
*) lte - modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;
*) netinstall - fixed Netinstall procedure for ARM devices;
*) netwatch - automatically start migrated probes from previous RouterOS versions;
*) netwatch - changed ICMP default packet loss fail threshold to 85%;
*) ntp - fixed NTP server when "use-local-clock" is used;
*) ospf - fixed handling of external forwarding address;
*) ospf - improved stability when interface is being disabled during database exchange;
*) ovpn - fixed encryption key renewal process which caused periodic session disconnects;
*) ovpn - improved system stability when hardware acceleration is used on ARM64 devices;
*) ovpn - moved disconnected user logging message from "debug" to "info" topic;
*) ping - improved service stability;
*) port - added support for D-Link DWM-222 in serial/PPP mode (device id - 0xac01/0x7e3d);
*) port - added support for Huawei/ZTE K5006z in serial/PPP mode (device id - 0x1017/0x1018);
*) ppp - improved service stability under high load;
*) ppp - use /32 as default netmask if not specified for "routes" parameter;
*) ptp - improved system stability on CRS devices;
*) quickset - removed PPTP and SSTP server addition for "VPN" checkbox;
*) rb5009 - fixed ether1 status reporting after system reboot;
*) route-filter - fixed "delete bgp-communities" command;
*) routerboard - added "reset-button" script feature for TILE devices;
*) sfp - fixed "eeprom" reading on single SFP port ARM devices;
*) sfp - fixed QSFP+ and QSFP28 interface disable when using breakout cable;
*) sfp - fixed unresponsive "sfp1" interface after disabling "ether1" on NetMetal devices;
*) sfp - improved combo SFP ports initialization handling on CRS312-4C+8XG, CRS328-4C-20S-4S+;
*) sfp - improved stability when using 2.5G optical modules in CCR2116, CCR2216 and CRS518;
*) snmp - fixed usage of VRF after system startup;
*) socks - fixed "dst-port" usage when checking access list;
*) ssh - added AES support for PEM decryption;
*) ssh - fixed importing of public keys;
*) ssh - fixed minor typo issue when importing public key;
*) sstp - fixed client stuck in "nonce matching" state;
*) switch - fixed ACL rules for 98DXxxxx switches with more than 28 ports (introduced in v7.3);
*) switch - removed limit for number of hardware-offloaded bonding interfaces;
*) swos - enabled SwitchOS support for CRS310-1G-5S-4S+;
*) swos - fixed SwOS upgrade procedure on CRS305-1G-4S+;
*) traceroute - added "do-not-fragment" parameter support (CLI only);
*) traceroute - increased packet size limit to 65535;
*) vrrp - added "sync-connection-tracking" compatibility with preemption-mode;
*) vrrp - fixed high CPU usage when "sync-connection-tracking=yes" and the backup router goes offline;
*) vrrp - fixed HW offloaded bridge MAC address learning when changing from VRRP master to backup;
*) vrrp - fixed initial connection tracking synchronization, a backup router now always receives all existing connections;
*) vrrp - improved connection tracking synchronization protocol (CTSYNC), the new protocol is incompatible with previous RouterOS versions with "sync-connection-tracking=yes";
*) webfig - allow to specify NTP server as domain name;
*) webfig - fixed displaying of grahs in status pages;
) webfig - fixed floating point field's negative value in -0.** format;
*) wifiwave2 - added "sae-pwe" parameter with hash-to-element mechanism for SAE PWE derivation;
*) wifiwave2 - added support for 802.11k;
*) wifiwave2 - disable wireless interface after wireless configuration reset;
*) wifiwave2 - fixed displaying of AKM in scan results;
*) wifiwave2 - fixed duplicated AKM in RSN message;
*) wifiwave2 - fixed group key update for client devices which connect via fast BSS transition;
*) wifiwave2 - fixed incorrect AKM usage for FT-WPA3-EAP-192;
*) wifiwave2 - fixed reassociation response sending for fast transition over DS;
*) wifiwave2 - fixed setting of "ft-nas-identifier" parameter;
*) wifiwave2 - fixed usage of Canada country setting on US locked devices;
*) wifiwave2 - improved default channel width selection for interfaces in station mode;
*) winbox - do not show previously attached LTE interfaces while establishing LTE connection;
*) winbox - enabled all filters by default under "Tools/Torch" menu;
*) winbox - fixed "Enable", "Disable" and "Comment" functions for L2TP-ether type interfaces;
*) winbox - fixed "Next Run" parameter displaying under "System/Scheduler" menu;
*) winbox - fixed "Type" and "Value" field displaying under "System/Health" sub-menu's;
*) winbox - show warning messages for BGP connection entries;
*) wireless - fixed interface initialization on x86 devices;
*) x86 - allow downgrading to RouterOS v6 only if it was previously installed;
*) x86 - fixed advertising of 2500M and 5000M link speeds on ixgbe driver;

io a dire il vero preferivo il supporto kvm...comunque mo farò un po' di prove...