Da aprile ho attivato la fibra FTTC 100/20 con Enel e rispetto a TIM noto delle differenze a livello di prestazioni (in alcuni casi peggiorative, in altre migliorative).
In termini di velocità navigo più veloce con Enel (con TIM navigavo quasi sempre a 30Mbps in down e 3 in up) con velocità intorno a 35/40Mbps in down e 13Mbps in up a parità di attenuazione (19db).
Ho notato però che spesso la portante viene rimodulata (per via dell'SRA attivo da Enel) e che il valore SNR oscilla di parecchio durante la giornata (target 6db ma varia tra i 4 e 9).
In questi attimi di SNR ballerino la navigazione va a rilento (il gaming è IMPOSSIBILE) e la portante rimodulata senza tuttavia causare disconnessioni (i LED restano sempre tutti verdi).
Inoltre nelle statistiche del modem noto che i valori di INP sono molto elevati.
Riguardo questo, indicano un problema sulla linea, interferenza in casa o sono parametri accettabili?
Grazie in anticipo!
=============================================================================
xDSLFwVersion: FwVer:5.12.24.0_B_A60901 HwVer:T14.F7_0.0
Line State: Up
Modulation: ITU G.993.2(VDSL2), G.998.4(G.INP)
Annex Mode: ANNEX_B
=============================================================================
INP downstream: 0
INP upstream: 16512
shineGINPdownstream: 610
shineGINPupstream: 570
reinGINPdownstream: 0
reinGINPupstream: 0
TPSTC type: 64/65B PTM TC
near-end interleaved channel bit rate: 51313 kbps
near-end fast channel bit rate: 0 kbps
far-end interleaved channel bit rate: 0 kbps
far-end fast channel bit rate: 14570 kbps
near-end FEC error fast: 0
near-end FEC error interleaved: 6054562
near-end CRC error fast: 0
near-end CRC error interleaved: 15107
near-end HEC error fast: 0
near-end HEC error interleaved: 0
far-end FEC error fast: 1633
far-end FEC error interleaved: 0
far-end CRC error fast: 0
far-end CRC error interleaved: 0
far-end HEC error fast: 0
far-end HEC error interleaved: 0
DSL uptime : 2:26, 41 secs
DSL activetime :0 min, 15 secs
Downstream:
relative capacity occupation: 100%
noise margin downstream: 7.4 dB
output power upstream: 9.1 dbm
attenuation downstream: 19.2 dB
Upstream:
relative capacity occupation: 100%
noise margin upstream: 7.5 dB
output power downstream: 14.1 dbm
attenuation upstream: 4.3 dB
Bit table:
carrier load: number of bits per tone
tone 0- 31: 00 00 00 09 ab de ee fe ff ff ff ff ef ff ff ee
tone 32- 63: e3 44 44 44 45 55 66 77 88 99 aa aa aa aa aa aa
tone 64- 95: aa aa aa 9a a9 aa aa aa 99 a9 99 99 99 99 89 99
tone 96-127: 88 88 88 88 77 87 77 77 77 77 77 77 77 77 77 67
tone 128-159: 77 77 66 66 66 66 66 66 65 55 65 55 55 55 55 44
tone 160-191: 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 55
tone 192-223: 55 55 55 56 66 66 66 67 66 77 66 77 77 77 77 77
tone 224-255: 99 aa bb cc cd dd de ee ee fe ee ff ff ff ff ff
Inoltre, nei settaggi DSL del modem fornito da Enel ho queste impostazioni attive, dovrei disattivare SRA o altri parametri?